Circuitron 800-1302 – End Of Train Flasher (Red) – HO Scale Kit

The CIRCUITRON EOT flasher includes the same LED as the CF-1. Refer to the description of the CF-1 regarding modifications to the LED which will result in a realistic HO scale device. After modifying, the LED is easily mounted on the coupler of any freight car. The electronic flasher module of the EOT is not much larger than the eraser end of a pencil and will easily fit in just about any scale model. The EOT requires a 3 volt power source which is most easily obtained from a pair of small batteries, or a single lithium watch cell (3 volts), although the TP-1 Track Power Adapter can be used if the car is equipped with track power pickups. A pair of fine lead wires are provided for connecting the LED. Soldering is required.